• 1 CTRB Puller Cum Installer
    Supplier & Manufacturer of CTRB puller cum installer. Our product range also comprises of Induction Heaters, Tyre Induction Heater and Electric Induction Heater.
    CTRB puller cum installer
    Solonoid control valve for operation
    Easy & fast removal of CTRB (Cartridge Taper Roller Bearing) more than 80 CTRB per shift Safety valve, Pressure releif valve, Pressure control valve
  • 3 Hydraulic Bearing Extractor
    Our clients can avail from us a unique gamut of Hydraulic Bearing Extractor model: BWT with mobile workstation that is especially designed to inject oil under high pressure between the bearing bore and shaft seating, enabling the bearing to be pulled out floating on thin film of oil.

    The mobile workstation enables dismounting of direct mounted bearings without any damage or scoring to the bearing bore or shaft seating, with minimal force. This assortment of hydraulic bearing extractor with mobile workstation offered by us has become the standard equipment with the Indian railways for the purpose of dismounting of direct mounted spherical roller bearing fitted on the axles of ICF coaches and EMUs.
  • 4 Bearing Induction Heater
    Supplier & Manufacturer of Bearing Induction Heater. Our product range also comprises of Induction Heaters, Tyre Induction Heater and Electric Induction Heater.
  • 5 Induction Heater
    PRECISION Induction Heater - Series PIH SPL - is designed to heat the Bearings and other shrink-fit components prior to mounting using latest technology intelligent microcontroller based electronic controls.

    The life of Bearings and other torque transmitting steel components, which are shrunk-fit on shaft, may get cut short due to rough handling and faulty installation or mounting methods.

Our Products

Industrial Induction Heaters

Leading Manufacturer, Exporter and Supplier of Industrial Induction Heaters.

Conventional Induction Heater

Our clients can avail from us a range of Conventional Induction Heater model PIH 2004 that has heavy capacity to heat the components and is equipped with the latest technology micro controller based electronic control. This assortment of conventional induction heater model PIH 2004 is equipped with manual or automated roll-sliding arrangement for the standard yoke 105 x 105 x 620 mm.

Features of conventional induction heater are as under :
 » The Roll-Sliding Arrangement is designed in a manner that the yoke gets lifted mechanically or automatically rolls off from the vertical supports, without rubbing or damaging and scraping mating surfaces
» This design lends additional safety, ease of operation and also results in better productivity
» Weight: 300kg
» It can heat a bearing of 700 kg to temperature as per requirement in customized time

Induction Heater Special Type

Item Code: PIH-SPL 2001 - 2002 - 2003

Precision induction heater is available as Model PIH-SPL .

The features of our induction heaters are:
 Swing arm arrangement
Boost Up facities
Heating job of 300 Kg.